# Manual OTA Update Process for the Coolpad Note 3## Step-by-Step GuideTo manually update your Coolpad Note 3 device over the air (OTA), follow these detailed steps:### Step 1: Prepare Your Device- Charge Your Battery: Ensure that your Coolpad Note 3 has at least 50% battery charge to prevent the update process from being interrupted due to a low battery.- Back Up Data: It’s advisable to back up your important data and files to avoid any loss during the update process.### Step 2: Check for System Updates- Access Settings: Navigate to the "Settings" option on your device.- System Update: Look for a "System Update," "Software Update," or similar option. Tap on it.### Step 3: Check Your connectivity- Wi-Fi Connection: Ensure your device is connected to a stable Wi-Fi network as updates can be large and require a secure connection.- Cellular Network: If you prefer, you can use your mobile data connection, but ensure you have enough data for the update.### Step 4: Update Your Device- Download the Update: Follow the on-screen instructions to check for updates. Downloading can take some time, so be patient.- Accept Terms & Conditions: If prompted, review and accept the terms and conditions of the update.### Step 5: Install the OTA Update- Get Started: Once the update file size is complete, the installation process should start automatically.- Follow Prompted Steps: Your device will guide you through any necessary steps, such as making sure your device is not in use or connected to power.### Step 6: Complete the Update- Do Not Interrupt: Do not turn off your device or disconnect it during the installation process. Do not use your device until the update is finished.- Restart Device: After the update is complete, your Coolpad Note 3 will restart automatically.### Step 7: Verify Update- Check for Confirmation: The updated OS version should be displayed on your screen.- Test Your Device: Try running some applications or normal usage to ensure everything works as expected.Remember, these instructions may vary slightly depending on the firmware version of your Coolpad Note 3 and the current software available. Always refer to the manufacturer's support resources for the most accurate information.

时间：2024-09-21 15:04:07 来源：网络整理编辑：Twitter

核心提示

UnbeatableValue,UnmatchedPerformance:DiscovertheCoolpadNote3Embracecutting-edgetechnologyatanastonis

Unbeatable Value, Unmatched Performance: Discover the Coolpad Note 3

Embrace cutting-edge technology at an astonishing rate of INR 8,999—the Coolpad Note 3 guarantees incredible specifications and features that have captivated the Indian audience. A software update was recently launched to elevate the Coolpad Note 3 experience, addressing numerous bugs and system hitches, with a seamless transition from software versions V 015 / V 019 to V 020.

Coolpad Note 3

INR 8,999 Deal

Upgrades from V 015 / V 019 to V 020

Delve Deeper: Coolpad Note 3 Comprehensive Specifications | Captivate Your Senses with the Camera Review | Locate Your Nearest Coolpad Phone Service Center in India

Unlock the full potential of your Coolpad Note 3—learn how to safely and effortlessly update your device with our detailed guide below.

Safe Upgrade to the Latest Version

Step 1: Navigate to About Phone in your Settings menu to verify the current software version. If you're on V 015, download this dedicated file. For V 019, opt for this one.

Step 1

V 015 Software Version:

This File

V 019 Software Version:

This File

Be sure to grab the correct zip file corresponding to your device's software version.

Step 2: Obtain and place the incremental OTA zip file into the Root Directory of your SDcard, avoiding any other folder for expedited access selection.

Step 2

Root Directory

SDcard pathways

Step 3: Don't forget to back up all your cherished data, including contacts, chats, snaps, videos, and other essentials stored on your device. This safety measure ensures that you're covered should any technical mishap occur.

Step 3: Backup Essential Data

Step 4: Power down your phone, then firmly press and hold the Power and Volume Up buttons simultaneously for a few moments. Enjoy the sensation as your device vibrates and the familiar Android robot appears, baring the ominous red exclamation mark一一"NO COMMAND" at its feet.

Step 4

Press
Hold
Power Button
Volume Button
No Command Error

Step 5: Continue by pressing and holding the Power and Volume Up buttons again for a brief interval. Voilà! You've successfully entered Recovery Mode.

Step 5

Press
Hold
Power and Volume Up Buttons

Step 6: Using the Volume down button, navigate to "Apply Update from SDcard" and firmly press the Power button to select it. Gaze upon your SDcard's contents.

Step 6

Volume
Apply Update from SDcard
Press Power

Step 7: Choose your downloaded zip file (either update_15-20.zip or update_19-20.zip), move the cursor down using the Volume down button, and finalize with a Press Power confirmation. Embark on your update journey.

Step 7

Volume
update_15-20.zip
update_19-20.zip
Press Power

Caution: Never abort the update process under any circumstances to avoid potentially fatal damage to your device.

Step 8: With finishing the update process, return to the recovery menu, select "Reboot System Now," and trigger the restart with a dignified Press Power command.

Step 8

Reboot System Now
Press Power

Stream the accompanying video to master every 很斑块 with precision.

After a momentary halt, your phonefilesize will come back to life. Cheering! Your software has been updated successfully to the latest edition.

Suggestions for any hurdles during the upgrade process? Reach out, and our teams are ready to assist fully.

上一篇：### Refresh Your YouTube Watch History: 6 Effective MethodsErase Past Browsing and Take Control of Your Viewings with These Simple Steps**1. Accessing Your Watch History**To begin managing your watch history, follow these steps:- Click your profile picture in the top right corner of YouTube.- Select **‘History’** from the dropdown menu.- Navigate to **‘Watch History’** on the left-hand side.**2. Clearing Your Watch History**To delete all or specific videos from your history:- After accessing your watch history, scroll to the bottom of the page and click **‘Clear all watch history’**.- Alternatively, tick the boxes next to the videos you want to remove, then click **‘Remove’** at the bottom of the page.**3. Disabling Watch History**For a more personalized streaming experience, you can disable your watch history:- In the **‘History’** settings, toggle the **‘Save watch history’** button to off.- This option will prevent YouTube from saving the videos you watch for future viewing sessions.**4. Managing History Through Google Account Settings**If you prefer to manage your history directly through your Google account, do the following:- Go to **[Google’s Activity Controls](https://myactivity.google.com/myactivity)**.- Navigate to **‘YouTube & Video’** from the left-hand menu.- Here, you can review and manage your activity history.**5. Clearing YouTube App History on Mobile Devices**On your smartphone or tablet:- Open the YouTube app.- Go to the account icon in the top right corner.-Tap **‘History’** and then **‘Manage Watch History’**.- To clear history, select **‘Clear watch history’**.**6. How to Manually Remove Videos from the Recommendations Section**Occasionally, YouTube might recommend videos similar to what you’ve watched. Below are steps on how to discontinue these suggestions:- In the YouTube app or on the website, look for the **‘Recommended’** section.- Click the three vertical dots next to any recommended video.- Select **‘Ignore’** in both the app and on the website to discontinue such recommendations.By following these straightforward steps, you can easily manage and maintain your privacy on YouTube.

下一篇：## 3 Efficient Methods to Access All File Extensions on Your Android DeviceOpening files with different extensions on an Android smartphone can sometimes present a challenge. However, there are several methods to ensure that you can open any file type you come across. Here are three effective ways to manage various file extensions on your Android device:### Method 1: Use a File Manager AppA versatile file manager app is a handy tool for navigating files and opening file extensions. Here’s how you can use one:1. **Download and Install a File Manager**: - Access the Google Play Store from your Android device. - Search for a reputable file manager with a high rating and good reviews. - Download and install the app.2. **Explore Your Files**: - Open the file manager app and navigate through your files. - Locate the file with the extension you want to open.3. **Open the File**: - Tap on the file, and it should automatically open with the appropriate app installed on your device.### Method 2: Use a Built-in File ViewerSome Android devices come with a built-in file viewer capable of handling multiple common file types. To use this method:1. **Navigate to the File**: - Access your file storage, whether it’s the internal memory or an SD card.2. **Long-Press the File**: - Touch and hold the file for a moment until a pop-up menu appears.3. **Select the File Viewer**: - Choose a viewer option from the menu that aligns with the file’s extension to open it.### Method 3: Install Apps for Specific File TypesIf you have a particular file type that won’t open on your device, you can install an app specifically designed for that purpose. Follow these steps:1. **Search for the Relevant App**: - Open the Google Play Store and search for an app compatible with the file extension (e.g., PDF reader for .pdf files).2. **Install the App**: - Select the appropriate app from the search results and tap “Install.”3. **Open the File**: - Navigate to the file, long-press it, and choose the new app from the available options.By utilizing these three methods, you should be able to open any file extension on your Android device with confidence.

Delve Deeper: Coolpad Note 3 Comprehensive Specifications | Captivate Your Senses with the Camera Review | Locate Your Nearest Coolpad Phone Service Center in India

推荐

热门