您的当前位置：首页 > Facebook > # Manual OTA Update Process for the Coolpad Note 3## Step-by-Step GuideTo manually update your Coolpad Note 3 device over the air (OTA), follow these detailed steps:### Step 1: Prepare Your Device- **Charge Your Battery**: Ensure that your Coolpad Note 3 has at least 50% battery charge to prevent the update process from being interrupted due to a low battery.- **Back Up Data**: It’s advisable to back up your important data and files to avoid any loss during the update process.### Step 2: Check for System Updates- **Access Settings**: Navigate to the "Settings" option on your device.- **System Update**: Look for a "System Update," "Software Update," or similar option. Tap on it.### Step 3: Check Your connectivity- **Wi-Fi Connection**: Ensure your device is connected to a stable Wi-Fi network as updates can be large and require a secure connection.- **Cellular Network**: If you prefer, you can use your mobile data connection, but ensure you have enough data for the update.### Step 4: Update Your Device- **Download the Update**: Follow the on-screen instructions to check for updates. Downloading can take some time, so be patient.- **Accept Terms & Conditions**: If prompted, review and accept the terms and conditions of the update.### Step 5: Install the OTA Update- **Get Started**: Once the update file size is complete, the installation process should start automatically.- **Follow Prompted Steps**: Your device will guide you through any necessary steps, such as making sure your device is not in use or connected to power.### Step 6: Complete the Update- **Do Not Interrupt**: Do not turn off your device or disconnect it during the installation process. Do not use your device until the update is finished.- **Restart Device**: After the update is complete, your Coolpad Note 3 will restart automatically.### Step 7: Verify Update- **Check for Confirmation**: The updated OS version should be displayed on your screen.- **Test Your Device**: Try running some applications or normal usage to ensure everything works as expected.Remember, these instructions may vary slightly depending on the firmware version of your Coolpad Note 3 and the current software available. Always refer to the manufacturer's support resources for the most accurate information. 正文

# Manual OTA Update Process for the Coolpad Note 3## Step-by-Step GuideTo manually update your Coolpad Note 3 device over the air (OTA), follow these detailed steps:### Step 1: Prepare Your Device- **Charge Your Battery**: Ensure that your Coolpad Note 3 has at least 50% battery charge to prevent the update process from being interrupted due to a low battery.- **Back Up Data**: It’s advisable to back up your important data and files to avoid any loss during the update process.### Step 2: Check for System Updates- **Access Settings**: Navigate to the "Settings" option on your device.- **System Update**: Look for a "System Update," "Software Update," or similar option. Tap on it.### Step 3: Check Your connectivity- **Wi-Fi Connection**: Ensure your device is connected to a stable Wi-Fi network as updates can be large and require a secure connection.- **Cellular Network**: If you prefer, you can use your mobile data connection, but ensure you have enough data for the update.### Step 4: Update Your Device- **Download the Update**: Follow the on-screen instructions to check for updates. Downloading can take some time, so be patient.- **Accept Terms & Conditions**: If prompted, review and accept the terms and conditions of the update.### Step 5: Install the OTA Update- **Get Started**: Once the update file size is complete, the installation process should start automatically.- **Follow Prompted Steps**: Your device will guide you through any necessary steps, such as making sure your device is not in use or connected to power.### Step 6: Complete the Update- **Do Not Interrupt**: Do not turn off your device or disconnect it during the installation process. Do not use your device until the update is finished.- **Restart Device**: After the update is complete, your Coolpad Note 3 will restart automatically.### Step 7: Verify Update- **Check for Confirmation**: The updated OS version should be displayed on your screen.- **Test Your Device**: Try running some applications or normal usage to ensure everything works as expected.Remember, these instructions may vary slightly depending on the firmware version of your Coolpad Note 3 and the current software available. Always refer to the manufacturer's support resources for the most accurate information.

时间：2024-09-21 14:18:07 来源：网络整理 编辑：Facebook

核心提示

UnbeatableValue,UnmatchedPerformance:DiscovertheCoolpadNote3Embracecutting-edgetechnologyatanastonis

Unbeatable Value, Unmatched Performance: Discover the Coolpad Note 3

Embrace cutting-edge technology at an astonishing rate of INR 8,999—the Coolpad Note 3 guarantees incredible specifications and features that have captivated the Indian audience. A software update was recently launched to elevate the Coolpad Note 3 experience, addressing numerous bugs and system hitches, with a seamless transition from software versions V 015 / V 019 to V 020.

Coolpad Note 3

INR 8,999 Deal

Upgrades from V 015 / V 019 to V 020

Delve Deeper: Coolpad Note 3 Comprehensive Specifications | Captivate Your Senses with the Camera Review | Locate Your Nearest Coolpad Phone Service Center in India

Unlock the full potential of your Coolpad Note 3—learn how to safely and effortlessly update your device with our detailed guide below.

Safe Upgrade to the Latest Version

Step 1: Navigate to About Phone in your Settings menu to verify the current software version. If you're on V 015, download this dedicated file. For V 019, opt for this one.

Step 1

V 015 Software Version:

This File

V 019 Software Version:

This File

Be sure to grab the correct zip file corresponding to your device's software version.

Step 2: Obtain and place the incremental OTA zip file into the Root Directory of your SDcard, avoiding any other folder for expedited access selection.

Step 2

Root Directory

SDcard pathways

Step 3: Don't forget to back up all your cherished data, including contacts, chats, snaps, videos, and other essentials stored on your device. This safety measure ensures that you're covered should any technical mishap occur.

Step 3: Backup Essential Data

Step 4: Power down your phone, then firmly press and hold the Power and Volume Up buttons simultaneously for a few moments. Enjoy the sensation as your device vibrates and the familiar Android robot appears, baring the ominous red exclamation mark一一"NO COMMAND" at its feet.

Step 4

Press
Hold
Power Button
Volume Button
No Command Error

Step 5: Continue by pressing and holding the Power and Volume Up buttons again for a brief interval. Voilà! You've successfully entered Recovery Mode.

Step 5

Press
Hold
Power and Volume Up Buttons

Step 6: Using the Volume down button, navigate to "Apply Update from SDcard" and firmly press the Power button to select it. Gaze upon your SDcard's contents.

Step 6

Volume
Apply Update from SDcard
Press Power

Step 7: Choose your downloaded zip file (either update_15-20.zip or update_19-20.zip), move the cursor down using the Volume down button, and finalize with a Press Power confirmation. Embark on your update journey.

Step 7

Volume
update_15-20.zip
update_19-20.zip
Press Power

Caution: Never abort the update process under any circumstances to avoid potentially fatal damage to your device.

Step 8: With finishing the update process, return to the recovery menu, select "Reboot System Now," and trigger the restart with a dignified Press Power command.

Step 8

Reboot System Now
Press Power

Stream the accompanying video to master every 很斑块 with precision.

After a momentary halt, your phonefilesize will come back to life. Cheering! Your software has been updated successfully to the latest edition.

Suggestions for any hurdles during the upgrade process? Reach out, and our teams are ready to assist fully.

 

上一篇：# Mastering Quick Access: 3 Efficient Methods for Adding Quick Settings Tiles on Your Android DeviceDiscover the simplest ways to enhance your Android phone's functionality by adding Quick Settings tiles. Here are three convenient methods to achieve a more customized and accessible interface:## 1. Native Settings App Approach.Start with the most straightforward method by accessing your Android device's settings directly.- **Step 1**: Swipe down from the top of your screen to pull down the notification shade.- **Step 2**: Tap the gear icon located in the upper-right corner to open the Settings menu.- **Step 3**: Navigate to Home screen & desktop, then Smart controls.- **Step 4**: Tap Quick settings tiles.- **Step 5**: Enable the toggles for the settings you want to add to your Quick Settings panel.## 2. Using a Customizable LauncherFor a more tailored experience, you can install a third-party launcher and customize Quick Settings tiles from there.- **Step 1**: Download and install a customizable launcher app from the Google Play Store.- **Step 2**: Open the launcher settings within the app.- **Step 3**: Look for an option labeled Quick Settings panel or something similar.- **Step 4**: Enable the tiles you wish to display in the Quick Settings panel.## 3. Widget CustomizationWidgets can also function as Quick Settings tiles, giving you easy access to your most-used functions without moving around between apps.- **Step 1**: Long-press on your home screen until the Add Widgets option appears.- **Step 2**: Search for Quick Settings in the widget list or navigate to the relevant category.- **Step 3**: Drag and drop a Quick Settings widget onto your home screen.By following these three methods, you can add essential Quick Settings tiles to your Android device, streamlining your experience and giving you lightning-fast access to the settings you use most often.
下一篇：### New Content:**BlackBerry Priv Unveiled: Discover the Latest Pricing and Comprehensive Specifications****BlackBerry's Flagship Smartphone Gets a Makeover: Details on the BlackBerry Priv's Cost and High-End Features Exposed

推荐

热门

友情链接
纸飞机电脑客户端下载 Telegram安装 Telegram移动版

免责声明：本站所有信息均来源于互联网搜集，并不代表本站观点，本站不对其真实合法性负责。如有信息侵犯了您的权益，请告知，本站将立刻删除。

Copyright © 2019 Powered by # Manual OTA Update Process for the Coolpad Note 3## Step-by-Step GuideTo manually update your Coolpad Note 3 device over the air (OTA), follow these detailed steps:### Step 1: Prepare Your Device- **Charge Your Battery**: Ensure that your Coolpad Note 3 has at least 50% battery charge to prevent the update process from being interrupted due to a low battery.- **Back Up Data**: It’s advisable to back up your important data and files to avoid any loss during the update process.### Step 2: Check for System Updates- **Access Settings**: Navigate to the "Settings" option on your device.- **System Update**: Look for a "System Update," "Software Update," or similar option. Tap on it.### Step 3: Check Your connectivity- **Wi-Fi Connection**: Ensure your device is connected to a stable Wi-Fi network as updates can be large and require a secure connection.- **Cellular Network**: If you prefer, you can use your mobile data connection, but ensure you have enough data for the update.### Step 4: Update Your Device- **Download the Update**: Follow the on-screen instructions to check for updates. Downloading can take some time, so be patient.- **Accept Terms & Conditions**: If prompted, review and accept the terms and conditions of the update.### Step 5: Install the OTA Update- **Get Started**: Once the update file size is complete, the installation process should start automatically.- **Follow Prompted Steps**: Your device will guide you through any necessary steps, such as making sure your device is not in use or connected to power.### Step 6: Complete the Update- **Do Not Interrupt**: Do not turn off your device or disconnect it during the installation process. Do not use your device until the update is finished.- **Restart Device**: After the update is complete, your Coolpad Note 3 will restart automatically.### Step 7: Verify Update- **Check for Confirmation**: The updated OS version should be displayed on your screen.- **Test Your Device**: Try running some applications or normal usage to ensure everything works as expected.Remember, these instructions may vary slightly depending on the firmware version of your Coolpad Note 3 and the current software available. Always refer to the manufacturer's support resources for the most accurate information.,CloneMagazine  

sitemap